※1、活塞桿前端螺紋可直接旋入拉管，后端螺紋可附設(shè)行程開關(guān)觸頭裝置。
2、進出油管采用卡套式端直通管接頭，高壓軟管對接螺母與管接頭連接紋為M18×1.5，管子外徑為Φ12mm，泄油管應(yīng)選用內(nèi)徑為Φ22mm的透明塑料管。
※1、The piston rod, with the thread on the front end, can be screwed into the draw tube directly. An auxiliary device of stroke-mounting limit switch can also be fixed in the thread on the rear end of piston rod.
2、The in-and-out oil hose refers to straight thread connector. The high pressure soft hose nut and the connecting thread of the connector is M18×1.5. The outer diameter of the high press soft hose is Φ12mm. The leak oil hose should be Φ22mm transparent plastic hose.